Skip to main content


The eSecurity Advisor

Column: The eSecurity Advisor

From the January-March 2007 Issue

Last month, we began a multi-part series on confidentiality. We started first
by reviewing the pillars of security — confidentiality, integrity and
availability. We then discussed the importance of identifying all critical data
and reviewed a number of steps users could take to help safeguard the confidentiality
of their information, focusing first on physical access. We then discussed the
importance of backing data up and, finally, previewed some promising new hard
drive protection technologies that should afford further protection. With that
as the back drop, I wanted to continue our discussion on safeguarding our valuable
data, especially when users take their show on the road!

Unprotected Shares
Way back in the early days of Windows (Windows for Workgroups to be
specific), Microsoft provided a means for users to easily and conveniently share
file folders and printers with each other. These shared resources were simply
called “shares.” And when users shared resources, they would typically
allow anyone and everyone to connect, without the need for any type of authentication
or password. This was referred to as an “unprotected share.” And
while these shares made it fast and easy to access common files and connect
to networked printers, they present a notable security challenge in today’s
more mobile and complex connected environments. Let’s put it together
and see why.

  • To share a folder or printer in the Windows operating environment, a user
    need only right-click on the desired folder or printer, select “Sharing
    and Security” from the pop-up menu, then click the box entitled, “Share
    this folder on the network,” from the Sharing tab. Voila! The folder
    or printer is now accessible by others. Note: This procedure varies slightly
    depending on the version of the Windows operating system being used. It is
    also worth noting that while newer versions of the Windows operating system
    have tried to improve the security surrounding this ability to share folders
    and printers by providing better Help and walking the user the through the
    process in attempts to help limit unauthorized access, the process and end
    results remain largely unchanged.
  • The user may further designate whether other users are limited to only
    “reading” files within a folder, or whether they can “change
    and update” documents. Users will often give “full rights”
    to shared resources on their system so they can save any changes back to the
    original folder.
  • Windows indicates that a folder or printer has been “shared”
    by changing the icon to show a hand beneath the shared resource.
  • Once a resource has been shared, other users on the network are now able
    to access the contents of a folder accordingly.

This all sounds simple so far, but what happens when a user leaves the trusted
environment of the hard-wired office network with their laptop and begins making
connections on other networks, wired or wirelessly? The user may have been completely
comfortable providing full access to the contents of selected folders on their
laptop drive with other users in their home or corporate office, but that is
not likely what they intend once they are connected to client, hotel and/or
coffee shop networks with other unknown users. Yet, that’s exactly what
takes place.

Okay, so now you’re scared! What to do? Well, in most cases we recommend
turning off file sharing altogether (i.e., don’t share files on local
drives, especially laptops or other machines that may leave the office). We
also recommend turning off the Windows “Guest” account. This can
be inactivated under Start | Control Panel | User Accounts. That way, in the
event you find yourself sharing a network wire with someone who is looking to
gain unauthorized access to your machine, they can’t login as a “guest!”

In the end, if you wish to share files with other network users, it’s
best to place them in a shared location on a network server, where a login name
and password authentication are required to gain access.

While I have talked at some length previously regarding the importance and specifics
of 802.11 wireless security — i.e., use WEP at a minimum (WPA or WPA2
preferred), turn on MAC address restrictions, etc. — I wanted to share
a slightly different perspective on the use of wireless given its potential
impact on confidentiality. More and more of today’s devices are arriving
with wireless capabilities turned on out of the box. Whether it’s PDAs,
notebooks or printers, these devices are often pre-configured to make instant
connections to the closest available wireless access point. Unfortunately, this
can be one of the most dangerous security policies (i.e., connect with whatever
you can find, whenever you can find it). As a result, I have often encountered
situations where users find themselves wirelessly connected to the Internet
but have no idea how or where they are connected! And once connected, the user
is now sending and receiving data right alongside other unknown users. Given
that, we recommend the following:

  • Turn off wireless, except when it’s needed (i.e., don’t leave
    it set for “always on — connect when you can”).
  • Install and/or turn on a personal firewall on all desktop and laptop machines
    to help better protect them from inbound attacks from other users on the same
    network. That way, when wireless is turned on, users have one more layer of
    protection against outside attackers.
  • Be mindful of what programs are communicating over the wireless connection,
    and understand that some data may in fact be transmitting in clear text (i.e.,
    unencrypted). For example, one thing users should never do is access their
    POP3 e-mail accounts over a wireless connection since POP3 connection information
    is transmitted in clear text. This point was never more clearly made to me
    than when I was giving a talk on security in Las Vegas a few years back, and
    a student shared that by the end of my presentation, he had successfully captured
    login names and password information for more than 50 other users in the room
    who were using their laptops to connect to their e-mail accounts via POP3
    … all done via simple packet sniffing tools (available for free on the
    Internet) and the wireless connection provided by the hotel where the seminar
    was taking place. Talk about scary!

Based on the security issues surrounding wireless connectivity, we now recommend
that unless a user is confident that they have a secure connection and that
they can transmit data securely, then they should consider not using wireless
at all! Users must think about security first and convenience second!

So what happens when a user needs to securely send and receive information between
a remote location and the main office? Is it even possible? That’s where
Virtual Private Networks (VPNs) come in. A VPN creates a highly secure connection
between two end points by encrypting the information passed between them. And
VPN connections can be established in one of several ways:

  • Software — This method uses software at each end
    to encrypt/de-encrypt the traffic moving between. This approach is reasonably
    straightforward now that many organizations have standardized on the Windows
    Server operating platform (i.e., Windows Server has the necessary functionality
    to support software-based VPN connections on the server side). And the VPN
    client software required by end users is a part of the Windows XP desktop
    operating system.
  • Hardware — Hardware-based VPNs actually use hardware
    at one or both ends to help speed the encryption/de-encryption process. Depending
    on the amount of information traveling between two locations and the latency
    end users experience, a hardware-based VPN may be worth considering.
  • Third Party — If all this talk of VPNs gets you
    woozy, then you may want to consider outsourcing the process to a third party
    instead. This approach involves registering the host or head office end of
    the VPN with a third-party service. Then, when an end user needs to make a
    secure connection back to the office, they actually connect with the third-party
    service instead that then tunnels all the traffic securely for them. This
    spells secure connectivity with far less hassle.

In the end, there are so many ways our critical data may be placed at risk,
but using the various techniques and technologies we’ve reviewed, there’s
absolutely no reason a user’s data can’t remain secure and confidential.
Until next time, safe computing!


David Cieslak is a Principal in Information Technology Group, Inc. (ITG),
a computer consulting firm with offices in Simi Valley and Huntington Beach,
Calif. He is currently an instructor for K2 Enterprises and a frequent speaker
on technology issues. He also currently chairs the AICPA IT Executive Committee
and serves on the Information Technology Alliance board of directors and CalCPA